Report #: 27

Report Date:

Country: IRAN

Housing Type:

Housing Sub-Type:

Author(s): Behrokh Hosseini Hashemi, Faramarz Alemi, Mohsen Ghafory Ashtiany

Last Updated:

Regions Where Found: Buildings of this construction type can be found in rural areas of Iran. The percentage of this housing type in those regions is almost 10%. This type of housing construction is commonly found in rural areas.

Summary: This is a typical confined brick masonry housing construction common in rural areas of Iran. This building type is often used as a single-family house. Brick masonry shear walls confined with concrete tie columns and beams provide earthquake resistance in both directions. This building type is expected to have good seismic performance.

Length of time practiced: 25-60 years

Still Practiced: Yes

In practice as of:

Building Occupancy: Single dwelling

Typical number of stories: 1

Terrain-Flat: Typically

Terrain-Sloped: Typically

Comments:

These buildings are typically found in flat, sloped and hilly terrain. They do not share common walls with adjacent buildings. T

Plan Shape: Rectangular, solid

Additional comments on plan shape: The typical shape of a building plan for this housing type is rectangular. To view outside the building, typically a window opening is built in external walls. These windows almost take 40% of the external walls areas. The other wall has one or two doors. The door sizes are typically 90 X 210 (cm). The overall window and door areas are about 25% of the overall wall surface area.

Typical plan length (meters): 5

Typical plan width (meters): 9

Typical story height (meters): 3

Type of Structural System: Masonry: Confined Masonry: Concrete blocks, tie columns and beams

Additional comments on structural system: The vertical load-resisting system is confined masonry wall system. Gravity loads sustain by bearing masonry brick walls.

The lateral load-resisting system is confined masonry wall system. In both directions of the buildings lateral load-resisting system are provided by masonry brick shear walls which are confined with concrete tie column and beams.

Gravity load-bearing & lateral load-resisting systems:

Typical wall densities in direction 1: 15-20%

Typical wall densities in direction 2: 15-20%

Additional comments on typical wall densities: The typical structural wall density is up to 20 %. Total wall area/plan area (for each floor) 0.2.

Wall Openings: To view outside the building, typically a window opening is built in external walls. These windows almost take 40% of the external walls areas. The other wall has one or two doors. The door sizes are typically 90 X 210 (cm). The overall window and door areas are about 25% of the overall wall surface area.

Is it typical for buildings of this type to have common walls with adjacent buildings?: No

Modifications of buildings: This type of construction does not have many modifications.

Type of Foundation: Shallow Foundation: Reinforced concrete strip footing

Additional comments on foundation:

Type of Floor System: Other floor system

Additional comments on floor system: The floor/ and roof are considered to be a rigid diaphragm.

Type of Roof System: Roof system, other

Additional comments on roof system: The floor/ and roof are considered to be a rigid diaphragm.

Additional comments section 2: The main function of this building typology is single-family house. In a typical building of this type, there are no elevators and 1-2 fire-protected exit staircases. Building of this type can have as the one main entry so the two doors.

Buildings of this type in some places are located close together and in other places are scattered When separated from adjacent buildings, the typical distance from a neighboring building is 5 meters.

Who is involved with the design process?: EngineerArchitect

Roles of those involved in the design process: For design of building, engineers and architectures are both involved. However, during the construction process they do not spend any time to visit the site.

Expertise of those involved in the design process: As far as the design concern, engineers do their job properly. But the main problem is the construction of this type of buildings in rural areas, due to lack of skilled worker.

Who typically builds this construction type?: Other

Roles of those involved in the building process: It is typically built by developers and the builders does not necessary live in this building type.

Expertise of those involved in building process: The main problem is the construction of this type of buildings in rural areas, due to lack of skilled worker.

Construction process and phasing: Typically developers build these types of constructions. Process starts with the foundations and then bearing walls. Process continues by adding the concrete tie columns and then tie beams then placing of wood beams and finally putting the finishing on the hole building. The construction of this type of housing takes place incrementally over time. Typically, the building is originally designed for its final constructed size.

Construction issues

Is this construction type address by codes/standards?: Yes

Applicable codes or standards: The first official issue about this type of building was in 1987. The Iranian Code of Practice for Seismic Resistant Design of Buildings (Standard 2800) addressed this type of construction. Iranian Code of Practice for Seismic Resistant Design of Building, 1st Edition- 1987 and 2nd Edition-1999 Iranian National Building Code, Part: 8, Reinforced and unreinforced masonry buildings. The year the first code/standard addressing this type of construction issued was 1987. Iranian Code of Practice for Seismic Resistant Design of Building, 1st Edition- 1987 and 2nd Edition-1999.

Process for building code enforcement: The building department of municipalities approves the design and holds the designer responsible for the projects. For those constructions, which are supported by government's fund, there is a proper control during construction. But for the others, there is not any control.

Are building permits required?: Yes

Is this typically informal construction?: No

Is this construction typically authorized as per development control rules?: No

Additional comments on building permits and development control rules:

Typical problems associated with this type of construction:

Who typically maintains buildings of this type?: Owner(s)Renter(s)

Additional comments on maintenance and building condition:

Unit construction cost: A unit construction may cost 500,000 Rials/sq m ( 250 $US/sq m).

Labor requirements: For a typical one story building needs about 30 to 40 days to complete the load bearing structure.

Additional comments section 3:

The main reference publication used in developing the statements used in this table is FEMA 310 Handbook for the Seismic Evaluation of Buildings-A Pre-standard, Federal Emergency Management Agency, Washington, D.C., 1998.

The total width of door and window openings in a wall is: For brick masonry construction in cement mortar : less than ½ of the distance between the adjacent cross walls; For adobe masonry, stone masonry and brick masonry in mud mortar: less than 1/3 of the distance between the adjacent cross walls; For precast concrete wall structures: less than 3/4 of the length of a perimeter wall.

Vertical irregularities typically found in this construction type: Other

Horizontal irregularities typically found in this construction type: Other

Seismic deficiency in walls: Unequal stiffness distribution.

Seismic deficiency in frames: Poor quality of workmanship and materials.

Seismic deficiency in roof and floors: Lack of proper connection between roof and masonry shear walls They are not perfectly rigid diaphragm.

For information about how seismic vulnerability ratings were selected see the Seismic Vulnerability Guidelines

Has seismic strengthening described in the above table been performed?: No

A Simple Pictorial Guideline for Constructing Earthquake Resistant Adobe Building In Different Rural Areas Hosseini Hashemi,B. and Alemi,F. to be published in Farsi

Manjil-Rudbar Earthquake of June 20,90 Reconnaissance Report IIEES Publication No. 70-91-1, Tehran, Iran 1991

—- Iranian Code of Practice for Seismic Resistant Design of Building, 1st Edition- 1987 and 2nd Edition-1999 Building and Housing Research Center, BHRC-PN S 253, Tehran, Iran

Iranian National Building Code - Part 8: Reinforced and unreinforced masonry buildings Ministry of Housing and Urban Development, Tehran, Iran